0=Select a printer and click 'INSTALL'to begin driver installation.
1=Warning!
2=Copying file '%s'.
3=Installing file '%s'.
4=Updating file '%s'.
5=Please insert disk '%s' in drive!
6=File %s is already present in a newer version. Shall it be deleted?
7=Creating section [%s].
8=Setting entry '%s'.
9=Deleting file '%s'.
10=Installing '%s' to the Program Manager.
11='%s' was changed. You must reboot after installation.
12=Next line is changed by INSTALL
20=Installation error!
21=INSTALL.EXE can only run once!
22=Syntax error in section [%s]: %s=%s!
23=Not enough space available on disk drive %s. You need %s KB.
24=Cannot install when other applications are active - Close applications.
25=Wrong parameter : %s.
26=Program Manager cannot be programmed.
27=Can't delete file %s.
28=Low memory - Close applications.
29=Cannot find file '%s'!
30=Cannot create file '%s'!
31=Cannot read file '%s'!
32=File '%s' is corrupted!
33=Cannot write file '%s'!
34=Path in AUTOEXEC.BAT is too long!
35=Entry '%s' in AUTOEXEC.BAT is too long!
36=Cannot start programm '%s'!
37=The Windows path setting in AUTOEXEC.BAT requires a drive letter, for example, C:\WINDOWS. Please correct AUTOEXEC.BAT and restart your computer.
38=Can not write to network drive
39=Can not update '%s' on network driveNetDrive
40=Printer(s) installed ok! Re-Run Installer from Program Manager for other printer(s).
50=Question:
51=Wish to change '%s' (Original is saved in '%s')?
52=Overwrite '%s'?
[GCA strings_2]
;franτais
0=SΘlectionnez une imprimante et appuyer sur 'INSTALL' pour installer le gestionnaire.
1=Attention!
2=Copie le fichier '%s'.
3=Installe le fichier '%s'.
4=Met α jour le fichier '%s'.
5=InsΘrer la disquette '%s' dans le lecteur!
6=Le fichier %s est dΘjα prΘsent dans la nouvelle version. Doit-il Ωtre supprime?
7=CrΘer la section [%s].
8=Valide l'entrΘe '%s'.
9=Efface le fichier '%s'.
10=Installe '%s' dans le Gestionnaire de Programmes.
11='%s' a ΘtΘ changΘ. RΘinitialiser aprΦs l'installation.
12=La prochaine ligne est changΘe par Install
20=Erreur lors de l'installation.
21=INSTALL.EXE ne peut Ωtre exΘcutΘe qu'une fois!
22=Erreur de syntaxe dans la section [%s]: %s=%s!
23=Espace disponible insuffisant %s. Il faut %s KB.
24=Installation impossible lorsque d'autres applications sont actives. Fermez ces applications.
25=ParamΦtre incorrect: %s.
26=Le Gestionnaire de Programmes ne peut pas Ωtre programmΘ.
27=Suppression du fichier %s impossible.
28=MΘmoire basse - Fermer les applications.
29=Fichier '%s' introuvable.
30=CrΘation du fichier '%s impossible !
31=Lecture du fichier '%s' impossible.
32=Le fichier '%s' est endommagΘ!
33=Ecriture du fichier '%s' impossible !
34=Le Path (chemin) dans AUTOEXEC.BAT est trop long!
35=Entrer '%s' dans AUTOEXEC.BAT est trop long!
36=Impossible de lancer le programme'%s'!
37=Indiquez une lettre d'unitΘ dans le chemin Windows dans le fichier AUTOEXEC.BAT (C:\WINDOWS), puis amorcez de nouveau l'ordinateur.
38=Ecriture impossible sur le lecteur du rΘseau
39=Impossible mettre α jour le '%s' sur le lecteur du rΘseau NetDrive
40=Imprimante (s) installΘe! Lancez de nouveau le programme d'installation α partir du Gestionnaire de Programmes pour installer d'autres imprimantes.
50=Question:
51=Faut-il changer '%s' (l'original est sauvegardΘ dans '%s') ?
52=Faut-il remplacer '%s' ?
[GCA strings_3]
;english (uk)
0=Select a printer and click 'INSTALL'to begin driver installation.
1=Warning!
2=Copying file '%s'.
3=Installing file '%s'.
4=Updating file '%s'.
5=Please insert disk '%s' in drive!
6=File %s is already present in a newer version. Shall it be deleted?
7=Creating section [%s].
8=Setting entry '%s'.
9=Deleting file '%s'.
10=Installing '%s' to the Program Manager.
11='%s' was changed. You must reboot after installation.
12=Next line is changed by INSTALL
20=Installation error!
21=INSTALL.EXE can only run once!
22=Syntax error in section [%s]: %s=%s!
23=Not enough space available on disk drive %s. You need %s KB.
24=Cannot install when other applications are active - Close applications.
25=Wrong parameter : %s.
26=Program Manager cannot be programmed.
27=Can't delete file %s.
28=Low memory - Close applications.
29=Cannot find file '%s'!
30=Cannot create file '%s'!
31=Cannot read file '%s'!
32=File '%s' is corrupted!
33=Cannot write file '%s'!
34=Path in AUTOEXEC.BAT is too long!
35=Entry '%s' in AUTOEXEC.BAT is too long!
36=Cannot start programm '%s'!
37=The Windows path setting in AUTOEXEC.BAT requires a drive letter, for example, C:\WINDOWS. Please correct AUTOEXEC.BAT and restart your computer.
38=Can not write to network drive
39=Can not update '%s' on network driveNetDrive
40=Printer(s) installed ok! Re-Run Installer from Program Manager for other printer(s).
50=Question:
51=Wish to change '%s' (Original is saved in '%s')?
52=Overwrite '%s'?
[GCA strings_4]
;deutsch
0=WΣhlen Sie einen Drucker aus und drⁿcken Sie 'Installieren'um die Treiberinstallation zu starten.
1=Warnung!
2=Datei '%s' wird kopiert.
3=Datei '%s' wird installiert.
4=Neue Version von '%s' wird eingespielt.
5=Bitte Diskette '%s' einlegen !
6=Von Datei %s ist schon eine neuere Version vorhanden. Soll sie ⁿberschrieben werden ?
7=Block [%s] wird erstellt.
8='%s' wird eingetragen.
9=Datei '%s' wird gel÷scht.
10='%s' wird im Program Manager eingetragen.
11='%s' wurde geΣndert. Sie mⁿssen nach der Installation neu booten!
12=Die folgende Zeile wurde von INSTALL geΣndert:
20=Installationsfehler !
21=INSTALL.EXE lΣuft schon !
22=Fehler in Datei INSTALL.INF ([%s]) !
23=Nicht genⁿgend freier Platz auf Platte %s.
24=Bitte andere Programme beenden, bevor Sie die neue Version installieren !
25=Windows ist falsch eingestellt (%s), es kann nicht installiert werden.
26=Programm Manager kann nichtprogrammiert werden!
27=Datei %s kann nicht gel÷scht werden !
28=Zu wenig Speicher - Schlie▀en Sie einige Fenster !
29=Datei '%s' ist nicht auffindbar !
30=Datei '%s' kann nicht angelegt werden !
31=Datei '%s' ist nicht lesbar !
32=Datei '%s' ist beschΣdigt !
33=In Datei '%s' kann nicht geschrieben werden !
34=Der Pfad in AUTOEXEC.BAT ist zu lange.
35=Der Eintrag '%s' in AUTOEXEC.BAT ist zu lange.
36=Programm '%s' kann nicht gestartet werden!
37=Der Windows Pfad in AUTOEXEC.BAT ben÷tigt einen Laufwerksbuchstaben. z.B. C:\WINDOWS. Bitte Σndern sie die AUTOEXEC.BAT und starten ihren Computer neu.
38=Das schreiben auf dem Netzwerk nicht m÷glich
39=Die Datei '%s' kann nicht auf das Netzwerk geschrieben werden.
40=Modell(e) korrekt installiert! Wenn Sie weitere Modelle installieren m÷chten, starten Sie erneut den Installer mit dem Programm Manager.
50= Frage:
51=Soll '%s' geΣndert werden (alte Datei wird in '%s' gesichert)?